Kohler K-475 Guia De Instalacion página 8

Anchor
Wall Plate
Anchor
Wall Plate
Screws
Stately
Bonnet
For [B] Length Bonnets
5. Install the Bonnet
Partially thread a setscrew into each bonnet.
Position the escutcheon(s), if included, onto the bonnet(s).
Slide the bonnet onto the wall plate.
Position the setscrew hole in the bonnet so the setscrew faces
downward.
Make sure the bonnet pins engage the indexing holes in the back
of the escutcheon, if applicable.
Insert a 1" (2.5 cm) screw into the bonnet and tighten.
NOTE: When installing "Stately" accessories, make sure the bonnet
pins engage into the escutcheon holes.
1020823-2-D
Classic
Escutcheon
Bonnet
Holes
Bonnet Pins
For [A] and [B] Length Bonnets
8 Kohler Co.