Tools And Materials; Before You Begin - Kohler K-475 Guia De Instalacion

Tools and Materials

Assorted Assorted Hex
Screwdrivers Wrenches
Level Drill & 5/16" Bit

Before You Begin

DANGER: Risk of personal injury. These products are not
designed or intended for use as a grab bar or support bar. Do
not install any of these products in any area where they are
likely to be used inadvertently as a grab bar or support bar.
NOTICE: Measure the length of the bonnet included with your
accessory. Correspond the length of the bonnet with the [A] or [B]
bonnet dimension illustrated in the "Roughing-in Information"
section. Refer to the [A] or [B] dimension throughout the installation
guide to achieve proper installation.
These products should be located and mounted to a wall stud.
While it is possible to mount them to any surface, a stud
mounted product will yield the best results.
Use a level to ensure that the center lines for the wall plates are
vertical where applicable and the post center lines are horizontal
where applicable.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
1020823-2-D
Pencil Measuring
Tape
Plus:
• Assorted woodworking
tools
Compass
2
Claw
Hammer
Kohler Co.