Kohler K-475 Guia De Instalacion página 12

Wall Plate
[A]
Setscrews
Nylon-Tipped
Setscrews
[B]
Cylinder Head
8. Install the Glass Shelf
WARNING: Risk of personal injury and product damage.
Ensure the wall plates are properly aligned and securely
anchored. If the wall plates are improperly mounted, damage
to the glass may occur.
For [A] Length Bonnets
Install the wall plates. Ensure the wall plates are properly aligned
and securely anchored.
Position the bonnet against the wall plate, keeping the slot of the
bracket assembly horizontal.
Thread the nylon-tipped setscrews counterclockwise into the
bonnet while keeping the bonnet properly aligned.
Repeat the above procedure for the second bonnet.
Wet the ends of the shelf with mild soap solution.
Carefully slide the shelf into the bracket assemblies.
Insert four nylon-tipped setscrews (provided) into the bracket
assembly. Tighten the setscrews with a hex wrench. Do not
overtighten.
For [B] Length Bonnets
Slide a bracket assembly onto each end of the shelf. Ensure both
brackets are centered on the shelf and the setscrew holes are on
the same side.
1020823-2-D
Bracket
Assembly
Nylon-Tipped
Setscrews
Stem
12
Setscrew
Kohler Co.