Loading Paper - Citizen CT-S310II Manual De Usuario

3.7 Loading Paper

1. Turn on the power.
2. Pull the cover open lever forward and open the pap er cover.
3. Load the paper roll so that the printable side of the paper is facing down, as shown
by arrow A.
4. Pull a few cm of pap er straigh t out in the directio n of arrow B.
5. Close the paper cover until you hear a click. Paper is fed and cut automatica lly (by
the factory setting).
CAUTION
Always use the specified types of paper rolls.
Confirm that the paper roll is set correctly.
If the paper is skewed and not comin g straigh t out of the paper cover, open it and
straighten the paper.
Always pul l a few cm of paper straight out of the prin ter if you open the paper cover
while paper is loaded.
Press on the center of the paper cover to close it securely.
Be careful of paper cuts while loadin g the paper.
Do not touch the print head , man ual cutter, or auto cutter while the paper cover is
open. Doin g so may cause a burn or cut.
Pull the paper in the directio n of the B arrow when cutting paper manu ally.
Do not open the paper cover durin g printing.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Refer to 5.3 Manual Setting of Memo ry Switches
— 25 —
V10 CONSUMIBLES S.L.