Tabla de contenido
Idiomas disponibles
Idiomas disponibles
UNPACKING
WARNING: It is unlikely the product is faulty or has
a missing component. If you find product is faulty, do
not use the product until the parts have been replaced
or the fault has been rectified. Failure to do so could
result in serious injury.
Remove tripod, components and hardware from carton
and discard packaging. Tripod
position.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious injury,
place tripod on a firm, stable, flat and secure
surface before mounting/unmounting the work
light or making any adjustments to the work
light/tripod.
WARNING: To reduce the risk of serious injury,
ensure each work light is turned off and the
power cord is unplugged before mounting or
removing from the tripod.
KNOW YOUR PRODUCT
READ THIS USER MANUAL AND ASSOCIATED SAFETY
WARNINGS BEFORE ASSEMBLING AND ADJUSTING THIS
PRODUCT. Compare the illustrations with the actual unit
to become familiar with the location of knobs, switches,
components and adjustment features. Save this manual for
future reference.
Tripod Set Up (Fig. B, C)
To set up the tripod from its Collapsed Carrying Position
hold Tripod Head
8
securely while pushing the Support
Legs Collar Assembly
downward until it reaches the
2
Support Legs Collar Assembly Position Lock
the lower end of the tripod stand. Keep pushing until it
clicks into place. This indicates that the Support Leg Collar
Assembly is locked in place.
Fig. B
8
13
is shipped in its collapsed
13
3
located at
2
3
WARNING: Tipping Hazard. To reduce the risk
of serious injury, always make sure the Support
Legs Collar Assembly is in its locked position
before using.
To return the tripod to collapsed carrying position, press
the Tripod Leg Lock
Assembly
2
upward.
Fig. C
Tripod Height Adjustment (Fig. D)
WARNING: To reduce the risk of serious injury,
remove the work light(s) before adjusting tripod
height.
To adjust height, release the Height Extension Lock(s)
and extend the tripod pole(s) to the desired height. Once
height is established, ensure the Height Extension Locks are
,
secured.
Fig. D
Single Work Light (Fig. E, F)
WARNING: To reduce the risk of serious injury, use
only a COMPATIBLE CRAFTSMAN WORK LIGHT
with this tripod. Using an incompatible work light may
cause serious injury.
Compatible CRAFTSMAN work lights shown in this
manual are subject to change without notice. Please
visit www.CRAFTSMAN.com to obtain the most up
1
and pull the Support Legs Collar
1
English
4
4
3
Tabla de contenido
