Install The Projector On An Even And Stable Surface; Servicing; Replacing Parts; Power Cord - Maxell MP-WU9101B Manual Del Usuario

Install the projector on an even and stable surface

Do not put the projector on unstable cart, tripod, table and so forth to prevent it from falling, being
damaged, or causing injuries.

Servicing

If you have a problem with the projector, contact your local dealer or qualified service personnel. Do
not repair the projector by yourself so that you cannot be exposed to high voltage or other potential
hazards.
No servicing is allowed except by authorized personnel.
If you experience any of the following situation, unplug your projector from the outlet and contact a
qualified service personnel for assistance:
• Damaged power cord or power plug.
• If a foreign object has fallen into the projector or if you have spilled water or other liquid into the
projector.
• If the projector has been dropped accidentally or damaged.
• If you experience noticeably poor performance or malfunction of the projector despite having
followed instructions for normal operation.

Replacing parts

If any part of the projector is damaged, be sure to ask the service personnel to repair or replace with
the genuine parts and perform safety inspections to ensure that the projector operates normally. Using
non-certified parts cannot guarantee the reliability of the projector and may result in damages to the
projector or hazards such as fire or electric shock.
No maintenance is allowed by users. Do not open the cabinet.
No parts inside are repairable by users.

Power cord

Do not place the projector where the cord can be stepped on. This may result in fraying or damage
to the power cord, especially at the plug and the point of connection between the power cord and the
projector.
Incomplete power cord connection will cause sparks or fire.
Use the power cord bundled with the projector or the type of power cord specified for the projector (refer
to the rating descriptions printed on the power cord). If you are not sure of the power available at the
region you are in, consult your local power company. Using a wrong power cord has a potential of fire
hazards due to current overload.
Depending on the country and region you are in, the voltage and type of socket of the outlet may be
different from the projector. If you are unable to fit the power plug into the outlet, contact your local
dealer. Do not remove the extra pin on the power plug to forcibly fit it to the socket at the risk of your
own safety.
Connect the ground terminal for the AC inlet of this unit to the ground terminal of the building using
an appropriate power cord (bundled); otherwise it could cause fire or electric shock.
Install the projector where you can access the power outlet easily.
Warning, Notices, and Safety Instructions
7 7
English- English-