Installation Of The Projector; Installing The Projector Towards The Screen; Removing The Mount Cap On The Projector; Selecting The Correct Input Voltage Depending On Your Area - Maxell MP-WU9101B Manual Del Usuario

Installation of the Projector

Installation of the projector

1. Installing the projector towards the screen

Screen

2. Removing the mount cap on the projector

3. Selecting the correct input voltage depending on your area

TRIGGER
Select 200-240V
REMOTE
CONTROL HDBaseT

4. Connecting the power cord to the projector

Be sure that the power cord is not damaged and already connected to the power outlet properly.
Secure the power plug by locking
the plug holder clamp.
5. Connecting the projector to your PC and switching to "‫ "׀‬to turn on the power
POWER indicator turns to red, which means the projector is in standby mode.
12V OUTPUT
(OPTION)
20 20
English- English-
CONTROL V
LAN
HDMI 1
連接至牆壁插座
H B/Cb/Pb G/Y
COMPUTER IN 2
DVI-D
Connect the female side of the power cord
to power input socket of projector.
Desktop or laptop
computer
Desk Top or Notebook
R/Cr/Pr COMPUTER IN 1
Select 100-130V
IN OUT
SDI
HDMI 2