koban KRB-01 Instrucciones De Operación página 19

EN KRB-01
LOOP RESISTANCE METER
7 CHANGE OF BATTERY
1. When the low battery symbol appears " " on the LCD screen, the six 1.5 V 'AA' batteries should
be replaced.
2. Turn off the meter and remove the probes
3. Remove the tilt bracket from the back of the meter
4. Remove the four Phillips screws that hold the battery cover
5. Remove the cover of the battery compartment
6. Replace the batteries respecting the polarity
7. Secure the back cover and secure the screws.8. Vuelva a colocar el soporte de inclinación
19 / 26