Guarantee; Translation Of The Original Eu Declaration Of Conformity - AL-KO Solo CS 4235 Manual De Instrucciones

GB
NOTE
If you encounter any malfunctions that are not listed in this table or that you cannot rectify
yourself, please contact our customer service.

15 GUARANTEE

We will resolve any material or manufacturing faults on the appliance during the legal warranty period
for claims relating to faults, in accordance with our choice either to repair or replace. The legal warranty
period is determined by the legislation of the country in which the appliance was purchased.
Our warranty promise applies only if:
■
These operating instructions are heeded
■
The appliance is handled correctly
■
Original spare parts have been used
The guarantee excludes:
■
Paint damage that can be attributed to normal wear and tear
■
Wear parts that are marked with a frame
The guarantee period commences with purchase by the first end user. The date on the proof of pur-
chase is decisive. In the event of a guarantee claim, please take this guarantee declaration and the
original proof of purchase, and contact your dealer or the nearest authorised customer service centre.
This statement does not affect the purchaser's statutory claims for defects against the vendor.

16 TRANSLATION OF THE ORIGINAL EU DECLARATION OF CONFORMITY

We hereby declare that this product in its marketed form conforms to the requirements of the harmon-
ised EU Directives, EU safety standards and the product-specific standards.
Product
Battery chain saw
Serial number
G4013022
Type
CS 4235
Sound power level
EN ISO 3744
measured/guaranteed
103.3 dB(A) / 108 dB(A)
EC type approval
M6A-17 12-47028
56
xxxxxx (x)
Manufacturer
AL-KO Geräte GmbH
Ichenhauser Str. 14
89359 Kötz
Deutschland
EU directives
2006/42/EC
2014/30/EU
2000/14/EC
2011/65/EU
Conformity evaluation
2000/14/EC Appendix V
Notified body (2000/14/EC)
TÜV SÜD Product Service GmbH
Ridlerstraße 65
80339 Munich
Germany
No. 0123
The warranty becomes void in the case of:
■
Unauthorised repair attempts
■
Unauthorised technical modifications
■
Non-intended use
on the spare parts card
Duly authorised person for technical
file
Andreas Hedrich
Ichenhauser Str. 14
89359 Kötz
Deutschland
Harmonised standards
EN 60745-1:2009+A11:2010
EN 60745-2-13:2009+A1:2010
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:2015
Guarantee
Kötz, 01/12/2017
Dr. Wolfgang Hergeth
Managing Director
CS 4235