Start To Use - Telstar TRX596310MD Manual De Instrucciones

Automatic Refrigerator
TRX596310MD
it standing for at least 6 hours before switching it on in order to ensure it running well.
Make sure the power wire is not pinned by the refrigerator or other objects so as to avoid accidents arising
from power wire faults. Please check the voltage scope of your refrigerator against the actual power supply
before switching it on.
Screws Decorative cover for bottom beam
Attention
The refrigerator must be disconnected from the source of electrical supply before attempting the installation
of accessory.
Don't use mechanical equipment or other methods to accelerate the defrosting process except the means
recommended by the manufacturer.
Don't use any electrical appliances in the food storage compartments except the model recommended by
the manufacture.
The R134a refrigerant and cyclopentane foaming material used in the refrigerator are inflammable. All waste
and discarded refrigerators shall be placed away from naked fire and they are not allowed to burn.
Warm Reminder: Place foods into the drawer. Do not place any foods after removing the drawer

• Start to Use

You ought to get a good knowledge of all safety precautions and make sure that your refrigerator has been
placed properly in its final position before using.
1. Unpacking
Please install the decorative cover for bottom beam onto your refrigerator after unpacking and adjust the
front leveling legs to level your refrigerator.
2. Connecting Your Refrigerator to the Power Supply
Your refrigerator will enter the ex- factory default state after connecting to the power supply and it will display
target temperature for the refrigerator compartment and freezer compartment.
3. Work Modes of Your Refrigerator
You can set your refrigerator in either of the following two ways:
Auto mode: we suggest you choosing this mode if you have no special requirements. Your refrigerator will work
automatically after you chose this mode.
31