Take Out, Clean And Install The Ice Cube Box - Telstar TRX596310MD Manual De Instrucciones

4. Check the level of water tank from time to time (if the level of water tank is too low, ice cubes will be
smaller).
5. The ice-maker checks the ice amount automatically and stop ice- making when the ice storage box is
full.
6. You will hear the sound of motor after about two hours, which is the sound of pump providing water to
the ice maker and doesn't indicate malfunctioning.
7. It is normal that several ice cubes may stick together or get crushed.
8. When the refrigerator is used for the first time, the ice maker starts to work after the freezer compart-
ment is cooling for about three hours (maybe longer when there are much food stored). The ice-maker
could produce about 1.3Kg ice cubes within 24 hours, which may vary depending on the temperature of
freezer compartment, surrounding temperature, times of door opening/closing and other working condi-
tions.
9. The ice-maker is capable of automatic water supply, ice-making and ice-removal. Please don't take
out the ice cube box and add water by yourself.
If you did not use the fridge for a long time,you need to get the water out of the ice-maker when using
again,and clean the ice-maker to make sure the ice is pure.

• Take out, clean and install the ice cube box

lf the ice maker isn't used for a long period, ice cubes that are just produced might have unpleasant smell. You
must take out and clean the ice cube box.
Open the upper drawer in the freezer compartment, rotate the knob of ice maker counterclockwise by 90,
36
Automatic Refrigerator
TRX596310MD