Emptying The Bag; Removing Clogged Debris From The Impeller - Toro Super 325 Manual Del Operador

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17

Emptying the Bag

Note: The bag capacity is 52 liters.
1. Turn off and unplug the vacuum from the power source.
2. Empty any debris from the bag.
Do not store debris in the bag. To clean the bag, turn it inside
out and shake out any excess debris. Once a year, hand wash
the bag in soapy water and allow it to air dry.
Normal usage of the bag causes it to wear and
deteriorate over time. A worn or deteriorated bag
allows small objects to be thrown through the bag,
possibly injuring the operator or bystanders.
Check the bag frequently. If it is worn or deteriorated,
replace it with a genuine Toro vacuum bag.
Removing Clogged Debris
from the Impeller
1. Turn off and unplug the vacuum from the power source and
wait for all moving parts to stop.
2. Remove the vacuum tube.
3. Remove the debris from impeller blades.
4. Check the impeller for any signs of damage. If it is damaged,
contact your Authorized Toro Dealer.
5. Install the vacuum tube or, if you want to switch to blower
mode, the bottom inlet cover. Refer to Converting from
Blower to Vacuum or Converting from Vacuum to Blower
for more information.
Storage
Store the blower/vacuum and extension cord indoors, in a cool
dry location, out of reach of children and animals.
Ensure that the bottom inlet cover or vacuum tube is locked
in place.
Ensure that the power cord is secured in place on the back of
the blower and that the plug is fully seated.
7
Tabla de contenido
loading

Este manual también es adecuado para:

51552

Tabla de contenido