Uline H-800 Manual Del Usuario página 8

TO REPEAT THE LEnGTH PREVIOUSLY DISPEnSED
(STAnDARD MODEL H-800):
The dispenser "remembers" the last
length of tape dispensed and stores
that value in its memory. Pressing the
REPEAT key dispenses the same length
of tape that was previously dispensed.
This is especially handy if you are
42
dispensing a tape length that was
30
adjusted using the
X2
27
15 9
The REPEAT key also repeats standard number button
lengths. Each time you dispense a different length of
tape by pressing a different button or combination of
buttons, that figure:
• Is stored in the REPEAT button memory.
• Becomes the length dispensed the next time you
press the REPEAT button.
TO REPEAT THE LEnGTH PREVIOUSLY DISPEnSED
(AUTOMATIc MODEL H-1037):
The dispenser "remembers" the last two
lengths of tape dispensed and stores
those values in its memory.
Standard Mode
To dispense a 6" tape, press
Remove the piece of tape.
A
A
42
42
REPEAT
Press this will also dispense a 6" tape.
REPEAT
30
START
30
START
X2
27 27 X2
REPEAT 2
REPEAT 2
15 9
Press and a 9" piece of tape will be dispensed.
ENTER
9
15
ENTER
A
Remove the piece of tape.
42
REPEAT
30
START
27 X2
Press a 9" piece of tape will again be dispensed.
REPEAT 2
15 9
ENTER
Remove the piece of tape, press
tape will be dispensed.
42
In this way, any two lengths can be memorized by the
30
unit's electronics and can be repeated using
A
27
REPEAT
15
START
X2
REPEAT 2
9
ENTER
PAGE 8 OF 24
OPERATION CONTINUED
42
REPEAT
30
X2
27
A
The REPEAT Button
REPEAT 2
Lower left on the keyboard
15 9
REPEAT
A
START
or the buttons.
42
REPEAT
REPEAT 2
30
START
ENTER
27 X2
REPEAT 2
9
15
ENTER
42
42
30
30
27 X2
X2
27
15 9
once.
15 9
A
A
42
a 6" piece of
REPEAT
30
START
27 X2
REPEAT 2
15 9
REPEAT ENTER
START
X2
REPEAT 2
9
ENTER
AUTOMATIc MODE (AUTOMATIc MODEL H-1037)
A
In the Automatic Mode, removing a piece of tape
from the dispenser causes another piece of tape to be
dispensed automatically. Additionally, in the Automatic
Mode, the dispenser can remember up to three tape
START
lengths and automatically dispense them in the order in
which they were entered.
ENTER
TO AcTIVATE AUTOMATIc MODE
1. Make sure that the last piece of tape dispensed has
been removed.
2. Press
42
3. The indicator will be illuminated.
30
TO OnE TAPE LEnGTH AUTOMATIcALLY
27 X2
15 9
Press
6" tape.
42
Press REPEAT
42
A 30
REPEAT
A
30
27 X2
REPEAT 2
27 X2
15 9
Press
REPEAT 2
15 9
REPEAT
A six inch piece of tape will be dispensed -- remove
REPEAT
START
it another six inch piece of tape will be dispensed
START
automatically.
REPEAT 2
REPEAT 2
ENTER
TO REPEAT TWO TAPE LEnGTHS AUTOMATIcALLY
ENTER
First make sure the memory is clear of any lengths
previously stored. To do this, press "A" (the indicator turns
off). Remove any piece of tape that may have been
dispensed but not removed. Press "A" again. The indica-
tor lights (red) and the memory is cleared and ready for
your input.
Press
Remove the 6" tape.
42
30
42
27 X2
Press REPEAT 2
30 9
15
27 X2
Press 15
Remove the 9" tape.
42
30
X2
27
Press
REPEAT 2
15 9
42
Press REPEAT
30
27 X2
REPEAT 2
15 9
A 6" piece of tape will be dispensed. Remove the
6" piece of tape and a nine inch piece of tape will
automatically be dispensed. Removing the 9" piece
will then automatically dispense a 6" piece.
A
REPEAT
START
REPEAT 2
a 6" tape will be dispensed. Remove the
ENTER
A
A
START
START
ENTER
ENTER
a 6" tape will be dispensed.
A
A
REPEAT
START
REPEAT
START
ENTER
REPEAT 2
9 a 9" tape will be dispensed.
ENTER
A
REPEAT
START
ENTER
A
START
ENTER
1013 IH-800