Uline ECONODOT H-2930 Manual Del Usuario

H-2930
ECONODOT
®
DISPENSER
The EconoDot® is an economical bench-top machine
exclusively designed to dispense Glue Dots® Adhesive
Products in rolls of up to 8,000 adhesive patterns. These
instructions show the basic operation of the EconoDot
including set up, loading and operation.
For your safety it is important to read and
understand these instructions before using the
EconoDot. It is important to keep hands, hair,
clothing, jewelry and other loose objects away
from any moving parts during operation of this
machine.
The EconoDot is designed to exclusively dispense
patented Glue Dots Adhesive Products on registered liner.
Operating this machine outside of its intended nature
will result in poor results, damage to the machine or
compromised operator safety. Glue Dots International will
not be held liable for any damage to products or persons
resulting from improper use of the EconoDot.
PAGE 1 OF 9
SPECIFICATIONS
MATERIALS Steel, Aluminum
DIMENSIONS (L x H x D) 18.5" x 10.5" x 7.0"
WEIGHT 10 lbs
NOISE 45db
POWER 100-240VAC
50-60Hz
0.5A
24VDC
CYCLES 1 adhesive pattern per second
CAPACITY Up to an 8,000-count roll on registered liner;
Maximum 9.25" roll diameter
TEMP Min 50˚F; Max 122˚F
SAFETY
IMPORTANT: Only persons who have read these
instructions and who are familiar with the
proper use of the EconoDot should operate this
machine.
All electrical work performed on the EconoDot
should be performed by a licensed electrician
or trained person supervised by a licensed
electrician.
Draw-in or squeezing can occur between the
motor-driven and clamp rollers.
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
0421 IH-2930