Resetting To The Factory Default Settings; Further Information - Axis Q7411 Guia De Instalacion

Page 12

Resetting to the factory default settings

This will reset all parameters, including the IP address, to the Factory Default settings:
1. Disconnect the power from the AXIS Q7411, or if PoE is used disconnect the network cable.
2. Press and hold the Control button and reconnect power or the network cable if PoE is used.
3. Keep the Control button pressed until the Status indicator displays amber (this may take up to
15 seconds).
4. Release the Control button. When the Status indicator displays green (which can take up to 1
minute) the process is complete and the video encoder has been reset.
5. Re-assign the IP address, using one of the tools provided on the Installation and Management
Software CD.
It is also possible to reset parameters to the original factory default settings via the web interface.
For more information, please see the online help or the user's manual.

Further information

The user's manual is available from the Axis Web site at www.axis.com
Tip!
Visit www.axis.com/techsup to check if there is updated firmware available for your AXIS
Q7411. To see the currently installed firmware version, see the About web page.
Warranty
For information about Axis' product warranty and thereto related information, see
www.axis.com/warranty
AXIS Q7411 Installation Guide