Switching The Device Off - Olympia PS 707.2 CC Manual De Instrucciones

5 Operation
The recommended capacities stipulated in Chapter "Technical Data" must
Note:
not be exceeded, otherwise material will jam! Do not forget that the thick-
ness of the paper increases when folded, as a result of which the recom-
mended sheet capacity can be exceeded. Also reduce the quantity of pa-
per when shredding coarse paper.
5.1 Switching the device on
1. Set the On/Off switch to its ON position.
2. The POWER lamp lights up green.
3. The device is ready to operate.
5.2 AUTO function
When the AUTO function is activated, the shredding operation of the cutting mechanism
starts up automatically as soon as material is inserted in the infeed slot:
The device switches to forward drive and draws the material in.
●
When shredding is finished, the device switches off automatically.
●
The AUTO function is activated by setting the function switch to its AUTO setting.
When the AUTO function is activated, paper can be shredded via the
Note:
manual or automatic paper infeed. Only one infeed may be used at a time.
If you use more than one infeed, the device stops. Pay attention to the
permissible quantity of material which can be shredded.
5.3 Inserting paper in the manual paper infeed
A maximum of 7 sheets of A4 paper with a weight of maximally 75 g/m
Note:
may be inserted at a time.
1. The device is switched on and the AUTO function is activated.
2. Insert paper in the manual paper infeed.
5.4 Inserting paper in the automatic paper infeed
A maximum of 75 sheets of A4 paper with a weight of maximally 75 g/m
Note:
may be stacked in the automatic paper infeed.
1. The device is switched on and the AUTO function is activated.
2. Press the button in the middle of the safety guard and insert the stack of paper in the
automatic paper infeed.
3. The free end of the stapled/clipped stack of paper should be fed into the shredder
first.
5.5

Switching the device off

Set the On/Off switch to its OFF position.
22
2
2