Campbell Hausfeld NB006750 Manual De Instrucciones De Operación
Campbell Hausfeld NB006750 Manual De Instrucciones De Operación

Campbell Hausfeld NB006750 Manual De Instrucciones De Operación

Clavadora para acabado
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

See Warranty on page 10 for important information about commercial use of this product.
Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
REGISTER YOUR PRODUCT ONLINE NOW!
Table of Contents
Description . . . . . . . . . . . . . . . . . . . . . .1
Unpacking . . . . . . . . . . . . . . . . . . . . . . .1
Safety Guidelines . . . . . . . . . . . . . . . . .1
Operating the Nailer . . . . . . . . . . . . . .4
Fasteners . . . . . . . . . . . . . . . . . . . . . . . .7
Troubleshooting Chart . . . . . . . . . . . . .8
Warranty . . . . . . . . . . . . . . . . . . . . . . .10

Description

This nailer is designed for decorative
trim, molding, window casings,
furniture trim and picture frame
assembly. Features include: convenient
top loading magazine which holds up
to 100 nails, no-mar tip, adjustable
exhaust, single cycle trigger, quick clear
nose, and an adjustable depth of drive
mechanism.

Unpacking

After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.
READ & FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
DO NOT DISCARD
Campbell Hausfeld Nailers meet or exceed Industries'
Standards as set forth by the American National Standard
Institute/International Staple, Nail and Tool Association in
ANSI/ISANTA SNT-101-2002.
© 2011 Campbell Hausfeld/Scott Fetzer
Figure 1 - Model NB006750

Safety Guidelines

This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
hazardous situation which, if not
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.chpower.com
Finishing
Nailer
http://www.chpower.net/reg
avoided, MAY result in minor or
moderate injury.
information, that if not followed, may
cause damage to equipment.
NOTE: Information that requires special
attention.
Danger indicates
an imminently
Locate model and date code on
Warning indicates
tool and record below:
a potentially
Model No. ______________________
Date Code ______________________
Caution indicates a
potentially
NB006750
Notice indicates
important
Retain these numbers
for future reference.
IN720502AV 12/11

Capítulos

Tabla de contenido
loading

Resumen de contenidos para Campbell Hausfeld NB006750

  • Página 21: Descripción

    RECORDATORIO: ¡Guarde su comprobante de compra con fecha para fines de la garantía! Adjúntela a este manual o archívela en lugar seguro. Las clavadoras de Campbell Hausfeld cumplen o exceden 1-Sp IN720502AV 12/11 los estándares de la Industria establecidos en los códigos SNT-101-2002 de las organizaciones norteamericanas ANSI/ ISANTA .
  • Página 22 Manténgase alerta. Mire lo que en contacto con su representante Este manual contiene información está haciendo y use el sentido Campbell Hausfeld si tiene alguna sobre seguridad, funcionamiento y común cuando haga funcionar la pregunta. herramienta. No use la herramienta mantenimiento.
  • Página 23: Uso Y Cuidado De La Herramienta

    NB006750 Una chispa podría encender los vapores b. No fuerce la herramienta. Use la Instrucciones de Seguridad y ocasionar una explosión que podría herramienta correcta para la Importantes ( Continuación) ocasionarle la muerte o heridas graves. aplicación. La herramienta correcta Un soporte y equilibrio adecuados hará...
  • Página 24: Suministro De Aire

    Manual de Instrucciones de Operación indicado en la herramienta. Antes Instrucciones de Seguridad de conectar la herramienta al compresor. Reemplace las mangueras y conexiones que de usar la herramienta, verifique Importantes ( Continuación) estén dañadas o desgastadas. El rendimiento siempre que el suministro de aire desgastada.
  • Página 25 NB006750 puede utilizar un Cómo usar la Clavadora sin pegarse, a lo largo del área de desplazamiento. El resorte del elemento filtro para remover las LUBRICACION de contacto debe regresar el elemento impurezas líquidas y Esta clavadora requiere lubricación de contacto a su posición original sólidas que podrían...
  • Página 26: Para Cargar Y Descargar La Clavadora

    (vea para clavar los clavos. No exceda la Carga / presión de operación máxima de la Contacto Descarga). De lo contrario, los clavadora modelo NB006750 de 7,58 de Trabajo clavos serán expulsados de la bar. contra parte delantera de la la superficie de trabajo.
  • Página 27: Información De Intercambio

    Clavos Estos clavos para acabado de Campbell Hausfeld los puede comprar en su tienda más cercana. Si necesita ayuda para encotrar un artículo, comuníquese al 1-800-543-6400. Los clavos de Campbell Hausfeld cumplen o exceden el estándar ASTM F1667...
  • Página 28: Guía De Diagnóstico De Averías

    Manual de Instrucciones de Operación Guía de Diagnóstico de Averías Deje de usar la grapadora inmediatamente si alguno de los si guientes problemas ocurre. Podría ocasionarle heridas graves. Cualquier reparación o reemplazo de piezas los debe hacer un técnico califi cado personal de un centro autorizado de servicio.
  • Página 29 NB006750 Notas 9-Sp...
  • Página 30: Garantía Limitada

    8. RESPONSABILIDADES DEL COMPRADOR BAJO ESTA GARANTIA: A. Suministrar prueba fechada de compra y la historia de mantenimiento del producto. B. Llame a Campbell Hausfeld (800) 543-6400 por sus opciones de servicio incluidas en la garantía. Los costos de flete correrán por cuenta del comprador.
  • Página 31 NB006750 Notes/Notas...
  • Página 32 Operating Instructions Manual de Instrucciones de Operación Manuel d’utilisation Notes/Notas...

Tabla de contenido