Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

IV. Network Setup
4.1. Option One: Quick Configuration Using a Micro SD Card
4.1.1. Format the Micro SD card on your PC computer. Then create a file named "wifi.txt" in
the Micro SD card. Open it and input your WIFI network SSID and password as follows:
4.1.2. Save this file. Unplug the Micro SD card off your PC computer and insert it into your
camera when it is powered off.
4.1.3. Slide the Power Switch to the ON position. The camera will connect to your WIFI
network in 15-30 seconds.
4.1.4. When the WIFI indicator light stays illuminated, it means the WIFI configuration is
complete. At this point, connect your mobile device to another WIFI network, or turn off
your WIFI function and use your mobile network instead.
4.1.5. Launch the "BVCAM" APP, tap "+", "Add the new online Device", then input the
camera's UID, which is a combination of numbers and letters specific to your camera and
type in the default password "8888". Or you can scan the QR code which sticks on the top
of the clock camera. At last, click "OK" or "√" to add the camera. If the camera shows
online, it means you can view live or recorded video remotely as long as you have access
to the Internet.
4.2. Option Two: Through "BVCAM" APP
LAN (P2P) Mode Setup
4.2.1. Go to the WLAN Setting page on your phone or mobile device, connect to the
camera's WIFI signal named "YM*****". Wait for the WIFI to be connected and your phone
Tabla de contenido
loading

Tabla de contenido