Network Setup - Wiseup WIFI 09 Guia Del Usuario

III. Charging
3.1. Make sure that the camera is connected to the battery in the first place. Then connect the camera
to the charging adapter by using the USB cable provided; plug the charging adapter into an outlet AC
power socket to charge the camera.
3.2. The charging indicator light will glow solid yellow during the charging process.
3.3. The charging indicator light will go out when the battery is fully charged.
3.4. It will take about 7 hours to obtain a full charge. The camera is able to work 8 hours on a full
charge.
[Note]:
If you want the camera to work all the time, please keep it connected to an outlet power socket.
IV. Network Setup
4.1. Install the Camwf APP on your iPhone or iPad
Search for the Camwf APP inthe APP Store and install it on your iPhone or iPad.
4.2. LAN or P2P Mode Setup
4.2.1. Power on the camera by pressing the Power Button once. The LAN indicator light will illuminate
yellow for 10 seconds, and the WAN indicator light will illuminate yellow for 5 seconds and then go out.