III. Get Camera Ready
3.1. Before using, please make sure the camera is fully charged and the Micro SD card has
been formatted already and is securely fitted into the camera's SD card slot, or it will not work.
We recommend that you use a SDHC Class 10 Micro SD card.
3.2. If you need the camera to work 7/24 hours, connect it to an outlet AC power supply using
the USB cable and DC 5V power adapter included.
IV. Network Setup
4.1. Install "Smarp CAM" APP on your iPhone or iPad
Go to your App store, search for "SMARP CAM" and then install it on your iPhone or iPad.
4.2. LAN Mode or P2P Setup
4.2.1. Slide the Power Switch to the ON Position and go to the WIFI or WLAN setting page on
your iPhone or iPad, connect to the camera's WIFI signal named "SMARP-******". The WIFI
signal password is "12345". Wait for the WIFI to be connected.
[Note]:
If the camera's WIFI signal cannot be found after a long time, please recharge the camera or
restart it.