Assembling The Microscope; Manual Version - Optika Italy B-1000 Serie Manual De Instrucciones

7.4

Assembling the microscope

7.4.1 Manual version

1. Put the microscope stand on a solid table. Insert
M-1030 attachment (if provided) above the stand,
using the 2mm Allen wrench to tighten the screw.
(Fig. 1)
2. Connect the cable of the ALC (Automatic Light
Control) system to the socket placed on the right
side of the frame. (Fig. 2)
3. Insert the optical head above the attachment,
using the 2mm Allen wrench to tighten the screw.
(Fig. 3)
4. Insert eyepieces into the empty eyepiece slee-
ves. (Fig. 4)
Page 12
Fig. 1
Fig. 2
Fig. 3
Fig. 4