Unpacking; Assembling; Assembling The Microscope; Installing The Batteries (M-100Fled) - Optika Italy ECOVISION Serie Manual De Instrucciones

6.

Unpacking

The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container
and lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces)
fall out and get damaged. Using both hands (one around the arm and one around the base), lift the microscope
from the container and put it on a stable desk.
Do not touch with bare hands optical surfaces such as lenses, filters or glasses. Traces of grease or other
residuals may deteriorate the final image quality and corrode the optics surface in a short time.
7.

Assembling

7.1

Assembling the microscope

• No installation procedure is requested for this mi-
croscope series.
• Place the microscope on a sturdy table and con-
nect the power supply.

7.1.1 Installing the batteries (M-100FLed)

1. Using a screwdriver remove the fixing screw of
the battery compartment cover. (Fig. 1)
2. Remove the cover (Fig. 2) and insert the batteries
(provided), respecting the polarity. (Fig. 3)
3. Put back the battery compartment cover and
screw the fixing screw again.
Page 8
F ig. 1 F ig. 1
F ig. 2 F ig. 2
F ig. 3 F ig. 3