Thermostat Battery Replacement; Replacement Of The Damper Control Module Batteries - Airzone OneZone Manual Del Usuario

Ocultar thumbs Ver también para OneZone:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Thermostat battery replacement

To replace the batteries, insert a coin into the slot on the bottom of the thermostat and turn it 45 ° to separate the
thermostat from the base.
Once separated the touch screen, replace the batteries housed inside maintaining the same polarity (2 AAA
batteries 1.5V). Reassemble both parts to snap back to its original position
.
Separate the thermostat from the base with a coin
1.-
2.- Remove the exhausted batteries
3.-Insert the new bateries

Replacement of the damper control module batteries

When the batteries are reaching the end of its useful life for the damper, a red LED, next to the infrared sensor will
begin to flash. When this happens, it is time to change the batteries..
You'll need to remove the grille as you did to install the damper and access control module box.
Remove the battery holder box from the damper.
1-
Open the lid, separating the latches.
2.- Remove the batteries
10

Capítulos

Tabla de contenido
loading

Tabla de contenido