Onezone Thermostat; Installation; Onezone Damper - Airzone ONEZONE Manual De Instalación

OneZone thermostat

Power supply and consumption
Stand-by consumption
EN
Maximum distance
Operative temperatures
EN
FR
Operating humidity range
Set-point temperature range
IT
PT
Dimensions (WxHxD)
DE

INSTALLATION

ONEZONE DAMPER

Important: To install this system a screwdriver may be required.
To complete the installation, follow the steps:
1. Insert batteries (C Type) in the battery box following the directions for the batteries polarity.
2.
3. Connect the motor cable to the battery box.
4. Remove the air supply grille and insert the damper in the supply duct.
5. Affix the IR receiver connected to the battery box in the grille frame pointing towards where the thermostat will be
installed. Use the adhesive strapped to the IR receiver cable.
Important: Do not block the IR receiver, nor the transmitter in the thermostat. For a proper functioning, both devices have
to have direct visual contact.
6. Return the grille to its original position.
6
V max. 3.3 Vdc ± 10 %
108 mW
Communications
50 ft
Stock -
Operation
(non-condensing)
Reading accuracy ± 1ºF (0.5ºC)
Display accuracy ± 1ºF (0.5ºC)
Mechanical aspects
4.13x3.58x0.94 inch
W
H
D