Location Of The Thermostat; Onezone Thermostat Capabilities; Selection Of The Temperature Units - Airzone OneZone Manual Del Usuario

• 3. –
Verify the operation of the system. If the thermostat does not have indication of the temperature, power it on
by touching briefly the ON/OFF icon, Verify that the air equipment this running and set the temperature of the
thermostat to the minimum and maximum verifying that depending on the setting the air flows or not through the
grille. Then, set the temperature to the desired value.

Location of the thermostat

One of the most important issues for the correct operation of the system is the location of the thermostat.
The correct location is:
In an area with air circulation
Away from direct currents of cold or hot air
Away from sources of heat such as heaters or radiators.
Out of direct sun exposure.
Preferably not installed on exterior walls.
NOTE: Before affixing the thermostat in the wall, be sure that the thermostat can control the damper. To do that,
with the thermostat held in its location, repeat the procedure described in the installation section of the damper.
Only if the damper operates, then you can set the thermostat in that place.

OneZone thermostat capabilities

- Activate/Deactivate the zone temperature control (ON/OFF).
- Setting of the set point temperature (temperature wished in the zone).
- Automatic or manual operation.
- "Echo" Mode.
- Temperature schedule programming
- Setting of the zone operation mode (COLD, HEAT). * *
Note: This mode does not change the mode of the AC unit. It only affects the demand of temperature of the zone.

Selection of the temperature units

The OneZone thermostat allows the user to select the temperature units. The default is degrees Fahrenheit and the
user can change it to Celsius as follows:
1.- With the thermostat set to OFF, touch and hold
on the Airzone icon until the display shows all the
icons.
2.- The temperature appears on the screen. Touch
and hold on the Airzone icon, until the first setup
screen appears.
6