Tools And Parts; Parts Not Supplied; Dimensions And Clearances - arietta Segrino Guía De Instrucciones Para Instalación

Tools and Parts

Parts supplied
Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
WARNING!
Remove the protective film covering the product before putting
into operation.
• Hood assembly with blower and LED lamps already installed.
• 3 ⁄ "x10" (82.5x254 mm) rectangular air transition
1
4
• Grease filters
• Hardware bag with:
Part Qty
6
5x45 mm
6
8x40 mm
4
4x8 mm
4
4.5x13 mm
Tools/Materials required
• Level
• Drill with 1¼" (3.2 cm), ⁄ " (3.2 mm), and
1
8
drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
• Phillips screwdrive
r
Parts needed
• Home power supply cable
• ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
For vented installations, you will also need:
• 1 wall or roof cap
• Metal vent system
Part Qty
6
10 x 60 mm wall
anchors
6
5.4x75 mm screws
(for 10x60 mm wall
anchors)
2
Ø 6.4x18 mm washers
1
Torx 20 adapter
⁄ " (4,8 mm)
1
16

Parts not supplied

Optional Accessories
Kit # Part
No Return
KIT02724
Valve

Dimensions and Clearances

E
A
ASG430SSA
A 30" (76 cm)
B
C
D
E
F 29 ⁄ " (74 cm)
4
32
G
H
I
3
Kit # Part
Recirculating KIT02770
H
G
I
F
D
B
ASG436SSA
36" (91.54 cm)
23" (58.5 cm)
10" (25.3 cm)
11 ⁄ " (30 cm)
30
32
2 ⁄ " (5.4 cm)
1
8
35 ⁄ "(89.5 cm)
7
32
7 ⁄ " (19 cm)
1
2
2 ⁄ " (6.5 cm)
9
16
⁄ " (1 cm)
13
32
C