Tools And Parts; Parts Not Supplied; Dimensions And Clearances - arietta AAR428SSA Guía De Instrucciones Para Instalación

Tools and Parts

Parts supplied
Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
WARNING!
Remove the protective film covering the product before putting
into operation.
• 1 - 30" x 12" (76.2 x 30.5 cm) face panel with LED lights
already installed.
• 6" (15.2 cm) round air transition.
• 2 - Aluminum mesh filter.
• 2 - Mounting brackets.
• 2 - Metal spacers (for use when cabinet depth is greater
than 12")
• Hardware package with:
Part Qty
2
4.2 x 15 mm
8
4.5 x 13 mm
6
3.5 x 9.5 mm
4
3.5 x 9.5 mm
Tools/Materials required
• Level
• Drill with 1¼" (3.2 cm), ⁄ " (3.2 mm), and
1
8
drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
• Phillips screwdrive
r
Parts needed
• 1 wall or roof cap
• Metal vent system
Part Qty
8
4.2 x 19 mm
1
Torx 10 adapter
8
Ø 6.4x18 mm washers
8
Ø 4.2x12 mm washers
⁄ " (4,8 mm)
1
16

Parts not supplied

Optional Accessories
Kit # Part
No Return
KIT0102873
Valve
30" KIT02773
Stainless
Hood liner
36" KIT02774

Dimensions and Clearances

B
A
I* - Metallic spacers
Spacers has to be installed
and used when cabinet depth
is greater than 12".
AAR428SSA / AGR628SSA
A
B
C
D
E
F
G
H
I
3
Kit # Part
Recirculating KIT02770
H
G
F
E
D
C
I*
28 ⁄ " (71.8 cm)
1
4
26" (66 cm)
1 ⁄ " (2.9 cm)
1
8
10¾" (27.3 cm)
9½" (24.2 cm)
⁄ " (.85 cm)
5
16
14 ⁄ " (37 cm)
9
16
6" (15.2 cm)
½" (1.27 cm)
I*