Tools And Parts; Product Dimensions - arietta VENETO 30 Guía De Instrucciones Para Instalación

Parts supplied
Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
WARNING!
Remove the protective film covering the product before putting
into operation.
• Hood canopy assembly with blower and LED lamps already
installed.
• 6" (15.2 cm) round air transition
• Duct covers
• Hardware bag with:
Part Qty
6
5x45 mm
2
8x40 mm
2
3.5x9.5 mm
2
2.9x6.5 mm
Tools/Materials required
• Level
• Drill with 1¼" (3.2 cm), ⁄ " (3.2 mm), and
1
8
drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
• Phillips & Torx 20 screwdrive
Parts needed
• Home power supply cable
• ½" (12.7 mm) UL listed or CSA approved strain relief
• 2 UL listed wire connectors
For vented installations, you will also need:
• 1 wall or roof cap
• Metal vent system

Tools and Parts

Part Qty
4
10 x 60 mm wall
anchors
4
5.4x75 mm screws
(for 10x60 mm wall
anchors)
1
Duct cover bracket
1
Mounting template
⁄ " (4,8 mm)
1
16
r
Parts not supplied
Optional Accessories
Kit # Part
No Return
KIT0102873
Valve
Recirculating KIT02766
Extention KIT02762

Product Dimensions

A
AVN430SSA
30"
A
(76 cm)
B
max. 42
C*
max. 38
D**
E
F
G
H
*For non-vented (recirculating installations)
**For vented installations
3
Kit # Part
CFM
EXXCRKR8
Reduction
Replacement
KIT01658
carbon filters
Replacement
KIT01668
grease filters
H
F
G
C
D
E
B
AVN436SSA
36"
(91.2 cm)
19 ⁄ " (50 cm)
11
16
⁄ " (107 cm)
1
8
min. 28 ⁄ " (72 cm)
11
32
⁄ " (96.6 cm)
1
32
min. 28 ⁄ " (72 cm)
11
32
10" (25.4 cm)
8 ⁄ " (20.8 cm)
3
16
7 ⁄ " (18.3 cm)
13
64
6" (15.2 cm)