Tabla de contenido
Idiomas disponibles
Idiomas disponibles
03P-0006/HDB24EA manual
Pausing a wash cycle
If you need to pause the dishwasher in the middle of the cycle to add or
remove any items:
1. Open the door by squeezing the door latch slowly.
Note: Be careful moist hot air may rise out of the dishwasher.
2. Add or remove items. Once you have finished adding or removing,
simply close the door.
3. The washing cycle will now be resumed.Open door protection
Dishwasher will stop automatically if the door is opened during the
operation. Once the door is closed the cycle will resume automatically.
Preparing to Wash Dishes
To get best results, practice the following before you put dishware in the
dishwasher:
• Discard big chunks of food from the plate
before loading.
• Remove sticky foods and loosen burned-
on foods before loading.
• Empty liquids such as juice, soup, soda,
coffee or tea from glasses and cups
before loading.
• Rinse off acid based liquid, such as
vinegar or lemon juice right a way.
Failure to do so may cause discoloration to plates, food containers and
internal cabinet.
• It is not necessary to rinse the dishes before loading the dishwasher.
Food particals in the dishwasher will be disposed of by the built-in food
disposal.
Tips to avoid stains and films
The following suggestions are recommended to prevent stains and films
on dishware and utensils:
• Some citric based food products, coffee, tea and iron deposits in water
can cause a yellow or brown film on the inside surface if left for a long
time period.
• You must check water hardness to measure the amount of detergent
needed to wash. If water is extremely hard, then it may be causing
stains on items. You may need to use a water softener.
• Do not overload the dishwasher.
• Use the recommended water temperature to wash dishware.
11/7/03
5:42 PM
Page 10
English
8
Tabla de contenido
