Haier HDB24EA Manual Del Usuario página 20

03P-0006/HDB24EA manual
English
Dishware is chipped
• This is due to poor loading or overloading. You need to be careful when
loading. Do not overload. You need to place the glassware securely
against the pins. Make sure delicate items are on the side rack. We
recommend that fine chinaware or crystal items be hand washed.
• Do not jam the glassware items together when loading.
• Place delicate items on the upper rack.
• Move racks slowly in and out to avoid slamming the dishware items
together.
• Make sure all dishware and glassware items are securely in place when
loading to avoid falling over or striking against each other.
Noise
Some of the sounds you will hear are normal.
• You will hear the sound of the water fill and rinse.
• You will hear the drain pump motor operation to pump water out.
• You will hear the motor stopping at the end of the cycle.
• If some utensils are not secure in the rack, you will hear that they are
being tossed around the tub.
Over Sudsing
This is due to the use of regular hand washing detergent.
Detergent used should be for "Automatic Dishwasher Use". You must use
the proper detergent for best dishwashing results.
Dishware Odor
• This is due to an incomplete cycle.
You need to allow the cycle to be fully completed.
• New scented detergent used.
This is normal because different types of detergents may have different
fragrances.
Etching
• Too much detergent used.
Use the appropriate amount of detergent. Reduce the amount of
detergent used per load.
• The water temperature is too hot.
You need to lower the water temperature.
• Use of old detergent.
Read the expiration date. Avoid using old detergent. Use only fresh
detergent.
• Do not pre-rinse the dishes.
Simply scrape off large food particles
19
11/7/03 5:42 PM Page 21