Haier HDB24EA Manual Del Usuario página 8

03P-0006/HDB24EA manual
English
Normal Wash Cycle:
• This cycle is used for normal amount of soiled dishware, glassware and
silverware.
Rinse & Hold Cycle:
• This cycle is used for rinsing partial loads that will be washed later
Note: Do not use detergent or Heated Dry feature with the Rinse & Hold
Dry/Plate Warmer Cycle:
• To use plate warmer feature, fill the racks with clean, dry plates. Turn the
control knob to dry and put the Heated/Dry to the "on" position. When
the cyle is complete, the dishes will be warm and ready for serving.
Note: Handle with care for some plates may be too hot to handle with
Heated dry option
• Activating this option will turn on the heating element to hasten the
drying process.
Wash process
1. Load all the items in the racks and silverware basket as needed.
Note: Covering the spray tower will affect the cleaning of the wash
2. Pour the proper amount of detergent into the detergent dispenser.
3. Close the door until you hear it click shut.
4. If you need to use the "Heat dry" option, you must do so before setting
the wash cycle.
Note: This option must not be selected with Rinse & hold cycle.
5. Select the desired wash cycle. The wash process will begin at this time.
Warning: Keep children away from the machine when the door is
7
11/7/03 5:42 PM
cycle.
bare hands.
load. The spray arm must be able to properly rotate freely. Make
sure that the pot handles and other like items do not interfere with
the rotation.
opened because the moist hot air exiting out of the door may
cause harm.
Page 9