Test Strip - Fora 6 Connect Manual Del Propietário

Test Strip

ATTENTION:
The front side of test strip should face up when inserting
test strip.
Test results might be wrong if the contact bar is not fully
inserted into the test slot.
NOTE:
 The FORA 6 Connect Multi-Functional Monitoring System should only be used
with FORA 6 Connect Test Strips. Using other test strips with this monitoring
system can produce inaccurate results.
1. Absorbent Hole
Apply a drop of blood here. The blood will be
automatically absorbed.
2. Confirmation Window
This is where you confirm if enough blood has
been applied to the absorbent hole in the strip.
3. Test Strip Handle
Hold this part to insert the test strip into the
meter slot.
4. Contact Bars
Insert this end of the test strip into the meter.
Push it in firmly until it stops.
7