Test Strip - Fora G20 Manual Del Propietário

Test Strip

Your system measures the amount of sugar (glucose) in whole blood.
Blood is applied to the absorbent hole on the test strip and is
automatically drawn into the reaction cell where the reaction takes
place.
Absorbent Hole
Apply a drop of blood
here. The blood will be
automatically absorbed.
Test Strip Handle
Hold this part to insert
the test strip into the
ATTENTION:
The front side of test strip should face up when inserting
test strip.
Test results might be wrong if the contact bar is not fully
inserted into the test slot.
NOTE:
The FORA G20 Blood Glucose Monitoring System should only be used with

FORA G20 Test Strips. Using other test strips with this monitoring system can
produce inaccurate results.
8
meter slot.
Confirmation Window
This is where you confirm
if enough blood has been
applied to the absorbent
hole in the strip.
Contact Bars
Insert this end of the test
strip into the meter. Push
it in firmly until it stops.