Idiomas disponibles
Idiomas disponibles
▼ ☛ ☞ ✌ ✍ ✎ ✏ ✑ ✒ ✓ ☛ ✔ ✑ ✕
1. The safety cover must be mounted on the drive shaft of the processor bowl
(8).
2. Chop the food to be mixed into small pieces. Now place the ingredients that
are to be mixed into the mixing bowl ((4) max. 1.25 l) and place the lid (6) on
top. Do not overfi ll! Do not exceed the maximum quantity stated on the mi-
xing bowl! Now tighten the lid. The safety tongue on the rear on the external
edge of the cover must grip into the device above the handle.
❲ ❛ ✍ ✑ ☛ ✑ ♥ ✖ ✗ ❛ ✎ ✌ ✓ ✘ ✙ ✚ ☛ ✓ ✒ ✛ ✖
large lid of the mixing bowl are in place.
Lock the lid in place with the lock (7).
3. Never fi ll with hot food or hard ingredients such as potatoes, ice, coffee
beans, nuts, and so on.
4. If you wish to fi ll in more food to be mixed you can remove the lid and cover.
Switch the device off beforehand. Remove the lid (6) of the mixer vessel (4)
and fi ll with the desired ingredients.
vessel, as the underlying blade may cause injuries.
5. Place the lid on the mixer vessel again. If you are mixing cold food, insert the
lock (7) into the centre of the lid. When mixing warm foods take off the clasp .
Do not use the mixer when empty or without the lid.
6. Ensure that the function switch is in the „0" position.
7. Insert the plug in a duly installed 230V/50Hz socket.
8. Switch the device on (Level 1 or 2 etc.) or use pulse operation (P).
9. The mixing bowl must be held fi rmly in place during mixing.
10. For constant mixing (continuous mode):
When the device is operated on levels 1 to 6 the switch locks into place in the
respective position.
To switch the device off, turn the switch back to the „0" position.
11. For pulse mode (mixing at brief intervals) shift the switch to „0" position. The
appliance is off now. Please turn the switch to „P". Hold the switch in this
position according to the desired interval length. When the switch is released
it returns automatically to the off position.
12. In order to remove the mixer jug turn it counterclockwise.
13. Clean the used parts as described in „Cleaning".
▼ ☛ ☞ ☛ ✑ ♥ ✥ ✔ ✚ ✦ ✕
•
The safety cover (5) must be mounted on the drive shaft for the mixing drive
(3).
•
The processor bowl must be mounted as described under „Positioning the
Processor Bowl" above.
✺ ✧ ✧ ✧ ✧ ★ ✩ ✺ ★ ✪ ✫ ✬ ✭ ✮ ✯ ✰ ✱ ✲ ✳ ✴ ✵ ✲ ✲ ✶ ✷ ✷
■ ✁ ✂ ✄ ✂ ☎ ✆ ✝ ✞ ✟ ✠ ☎ ✄ ✂ ✡ ✁
The mixer only works when the mixing bowl and the
❆ ❚ ❚ ✜ ✢ ❚ ✣ ✤ ✢
Level 1 = low rpm
Level 6 = high rpm
: Do not reach into the mixer
✬ ✸ ✧ ✩ ✭ ✧ ✬ ✩ ✩ ✯ ✹ ✻ ✷ ✼ ✽ ✻ ✼ ✺ ✽ ✾ ✿ ✱
●
77
