EQUATION YAA02E-9UFH Instrucciones De Uso página 82

EN
Note: If press + or - without releasing, you can achieve rapid increasing or
decreasing;
If there is no pressing, the twinkle would stop 10 and setting will be finished
automatically.
Daily heating status setting
Note: the daily heating status is with factory pre-setting, if it's OK and no need
more changing, just wait 10 seconds after finished setting the time. If need to
change the program, set as following.
Press SET again, 12345 appears on the screen, the block starts to twinkle like
following picture
Press +/- to set on/off heating status in this hours, + means on, - means off , one
block means one hour, when with block, the heater will work in this hour, if without,
the heater won't work in this hour. When one block get set, it will go to next block
automatically and wait for setting. After setting block 24h, if user want to modify
the previous set program, keep pressing on + or -, it will go to first block to modify
the previous setting.
When the user confirm the setting, press on SET to go to the next step.
If there is no pressing on any button, the twinkle would stop after 10
seconds.
Note: the first block means the hour from 0 o'clock to 1 o'clock
If we set the heater working from 18:00 ~ 8:00 in workday, the picture is as
following:
Press SET again, 67 appears on the screen, set the heating status in the same
way.
82