Function DISPLAY OFF
17
The Display off function deactivates transmission of image to the display by
minimizing its brightness. This prevents accidental disclosure. The riflescope
and the built-in IR Illuminator keep running.
•
When the riflescope is on, hold down the ON (4) button. Display goes out,
message "Display off".
•
To activate the display, press briefly the ON button.
•
When holding down the ON button, the display shows
"Display off" message with countdown, the device will
turn off.
Using the WEAVER Rail
18
The riflescope is equipped with a Weaver rail (8) which allows the user to
mount extra accessories such as:
•
LED IR Illuminators Pulsar-805/Pulsar-940/Pulsar- X850
(#79071/79076/79074)
•
IR Illuminator Pulsar AL915 (#79132)
Technical Inspection
19
Please check before every hunt:
•
External view (there should be no cracks on the housing).
•
Correct mounting of the riflescope on your rifle (clearances are not allowed).
•
Correct functioning of the controls.
•
Ensure that the objective lens, eyepiece, IR illuminator are free of cracks,
grease spots, dirt, water stains and other residue.
•
Smoothness of the objective lens focus knob, dioptre focus knob.
•
The state of the Battery Pack (should be charged) and electric terminals
(there should be no oxidation).
Technical Maintenance
20
Technical maintenance should be done at least twice a year, includes the
following steps:
•
Clean the outside metal and plastic surfaces from dust, dirt and moisture;
wipe the scope with a soft lint free cloth.
•
Clean the electric contact points inside the battery compartment, external
contacts of the Battery Pack or battery holder for AA rechargeable batteries
using an oil-free solvent.
•
Inspect the eyepiece lens, the objective lens, IR illuminator and rangefinder
and gently blow off any dust and sand, and clean using lens cleaner and a
soft cloth.
•
Inspect the eyepiece lens, the objective lens, IR illuminator and gently blow
off any dust and sand, and clean using lens cleaner and a soft cloth.
20