Yukon SIGHTLINE N450S Manual Del Usuario página 17

•
Enter the option "Operating the distances" and enter it with a
short press of the controller – distances at which zeroing has
been done will be shown.
•
The values (for example, +7.0) shown on the right of the distance values,
stand for the number of clicks along the Y axis, at which the reticle position
at other distances differs from the reticle position in the primary distance.
•
To re-zero at any distance, select the desired distance and press briefly the
controller.
•
Zeroing screen which allows the change of zeroing coordinates will appear.
Changing the primary distance
•
Select a non-primary distance and enter the menu option for operating the
distances with a short press of the controller.
•
Select icon
•
Press briefly the controller.
•
Icon next to the selected distance confirms the change of primary
distance.
•
Upon change of the primary distance, the number of clicks along the Y axis
will be re-calculated automatically for the number of clicks different from
the new basic distance.
Deleting added distance
•
Select the distance you wish to delete and enter the submenu for operating
the distances with a short press of the controller.
•
Select item "delete distance".
•
Select "Yes" in the dialog box to delete a distance. "No" – to cancel deletion.
•
When selecting "Yes" you go to the submenu "List of distances"; "No" –
return to the previous screen "operating the distances".
Attention! If the primary distance is deleted, the first distance on the list
automatically becomes the new primary distance.
Additional menu for zeroing parameters setup
Having selected a zeroing distance and having entered the menu
option, the display shows the following
•
Windage/Elevation correction
•
Magnification
•
Zeroing with the FREEZE function
•
Edit distance title
Additional menu option "Windage/Elevation correction" allows
you to correct the reticle position.
For detailed description of the reticle position correction please refer to
section 12 "Zeroing".
Magnification
•
This submenu allows you to increase the riflescope's digital zoom when
zeroing which reduced the click value this improving accuracy of zeroing.
•
Having selected a zeroing distance and having entered the submenu, select
submenu "Magnification" with a short press of the controller.
•
Select the digital zoom value (i.e. 3x) by rotating the controller.
•
Confirm you selection with a short press of the controller.
– primary distance.
15