Yukon SIGHTLINE N450S Manual Del Usuario página 13

Attention! Not to hold the reticle
in the aiming point, you can use
the FREEZE function – freezing
the zeroing screen (refer to
main menu option "Zeroing" =>
submenu "Distance" => submenu
"Zeroing parameters setup" =>
submenu "Freeze"
•
Switch between movement
directions of the auxiliary cross
from horizontal to vertical with
a short press of the controller.
•
Save the new position of the reticle with a long press of controller. The
reticle will now move to the point of impact.
•
To defrost an image, select the "FREEZE" submenu and briefly press the
controller or briefly press the ON button, or exit the zeroing menu.
•
Exit the zeroing menu with a long press of controller.
•
Message "Zeroing coordinates saved" confirms successful operation.
•
After exiting the menu, take another shot - the point of impact should now
match the aiming point.
Quick Menu
13
The Quick menu allows to manage basic riflescope's settings
(display brightness and contrast, continuous digital zoom, stadi-
ametric rangefinder) and change zeroing distance (if several are
available) in the current shooting profile.
•
Enter the quick menu with a brief press oft he controller (3).
•
To toggle between the functions below, rotate the controller.
•
To exit the quick menu press and hold down the controller.
Automatic exit takes place in 5 sec of inactivity (controls are not used).
Brightness
– rotate the controller to change display brightness from 00
to 20.
Contrast
– rotate the controller to change display contrast from 00 to 20.
Information on the actual profile and zeroing distance A100
ing was done in this profile (for example, profile A, zeroing distance 100m).
Toggle between available combination of profile and distance (if there are
more than one) zeroing distances by rotating the controller.
Continuous Digital zoom
•
Rotate the controller to change digital zoom value.
•
Change step for digital zoom is 0.2x or 0.5x depending on the selected zoom
value.
Stadiametric rangefinder
measure distance to and object with known height (please refer to section 16
"Stadiametric Rangefinder" for more details).
Windage
– rotate the controller to move the bars to
Fig.
5
, at which zero-
11