Status Bar - Yukon SIGHTLINE N450S Manual Del Usuario

Status Bar

15
A
100m
1 2
The status bar is located in the lower part of the display and shows informa-
tion on the actual operating status of the riflescope, including:
1.
Actual zeroing profile (A;B;C)
2.
Zeroing distance (Distance is not shown before zeroing is done)
3.
IR Illuminator's power level (for example level 3)
4.
Full magnification (optical + digital zoom)
5. Function "Auto shutdown" (for example 1 min)
6.
Running time
7.
Battery charge level
The status bar shows the distance value at which zeroing was initially done.
After multiple zeroing distances are set, the status bar shows the distance
value selected in the hot menu.
Stadiametric Rangefinder
16
The riflescopes are equipped with a stadiametric rangefinder, which allows the
user to estimate approximate distance to an object of known size.
•
To select menu option "Stadiametric rangefinder", enter the quick menu
with a brief press of the controller and select icon
controller.
•
You will see on the display: measurement bars, icons of three reference
objects and respective distances for the three objects.
There are three pre-set reference objects:
Hare – height 0.3 m
Wild boar – height 0.7 m
Deer – height 1.7 m
Move the lower fixed bar under the object
being ranged and, by rotating the controller,
move the upper horizontal bar relative to the
lower fixed bar until the object fits entirely
between the two bars. The distance to the
object is automatically recalculated as you move the upper line.
•
If ranging does not take place within 10 seconds, the information disappears
from the display.
•
To select the unit of measurement (metres or yards), go to the respective
menu option.
•
Before it appears on the display, a measured distance value is rounded up to
5 m for larger values, and rounded down to 1 m for smaller values.
•
Exit rangefinder mode with a brief press of the controller or wait 10 seconds
to exit automatically.
4.0x
IR
3 4
1min 02:50
5 6
by rotating the
7
19