Klarstein Blanca Manual Del Usuario página 23

Clock Before using the weekly timer, the clock must be set. To do
this:
• Press the clock button, then use the arrow buttons to
select the day.
• Press the clock button again, then use the arrow
buttons to select the hour value (24 hour format)
• Press the clock button again, then use the arrow
buttons to select the minute value.
Week Timer Your fireplace includes a 7 day timer, which allows you to
set two periods of operation per day. The fire will operate
with the previously used settings for the heating level,
desired temperature, and flame colour.
To set the timer press the week timer button. The unit will
display the day, period, and if you are setting the On or
Off time. For each period both the On and Off times must
be set.
For each Period:
1. Set the On hour value using the arrow buttons, press
the week timer button to confirm.
2. Set the On minute value using the arrow buttons, press
the week timer button to confirm.
3. Set the Off hour value using the arrow buttons, press
the week timer button to confirm.
4. Set the Off minute value using the arrow buttons, press
the week timer button to confirm.
The fire will then move onto the next period / first period of
following day, allowing this to be programmed in the same
way. The days and periods can be scrolled through by
repeatedly pressing the week timer button.
To clear an operational period set the ON and OFF times to
the same value.
Open Your fireplace includes „Open Window Detection" which
Window will stop the heating function after a period of time if the
Detection room temperature is not increasing, on the assumption
that there is an open door or window. This is designed to
save energy and can be turned on and off using the AUTO
button. When the function has been activated, AUTO will
flash on the screen.
EN
23