Operating Elements - Reiner jetStamp 1025 Instrucciones De Empleo

jetStamp 1025

Operating elements

1
Trigger button
2
Display
3
On/Off button
4
Operating status LED
5
Function key for print cartridge
6
Flap for battery print cartridge
compartment
7
Print carriage
8
Print cartridge
9
Seal
10
Seal retaining clip
11
Seal tip
Display and Buttons
Home
Scrolling
Back button
Select
The display depends on the respective menu context. The starting screen of the main
menu is displayed.
For the setting functions (see "Online help of the PCset graphic software").
To activate Bluetooth, press the home button
f
confirm (see "Online help for the PCset graphic software").
Important Notes
Before commissioning of the jetStamp 1025, always read the operating instructions and
in particular the safety notes with care. This prevents mistakes in handling of the marking
device and connected safety risks to keep you safe and avoid damage to the device.
Detailed operating instructions and further information can be found in the online help
of the PCset graphic software or on the enclosed USB stick.
7
12
Indicators of print position
13
Print area
14
Charging indicator
15
Connection socket for mains adapter
16
Jack socket for external trigger
17
Micro USB socket
18
SD card slot
19
Battery compartment
20
Locking battery compartment
21
Locking print cartridge
22
Print cartridge contacts
23
Nozzles print cartridge
Fig. F

a Header with the number of the set imprint
b Set imprint
c Menu bar with menu items and commands
d Four pushbuttons
, select Bluetooth , set active and