Routine Maintenance; Every Day; Every Month; Troubleshooting - Vollrath VCBA118 Manual Para Operadores

ROUTINE MAINTENANCE

Every day

Inspect the machine and check for leaks of product from the gaskets. If
you notice leaks, see the Troubleshooting section of this manual.

Every month

Remove the dust from the condenser filter at the back of the machine.
CAUTION
Sharp Edges and Corners
Condenser fins are sharp.

TROUBLESHOOTING

Problem
Intermittent dull noise.
It takes too long for product to be
ready to serve.
Product is leaking from the machine.
Condensation on the bowl(s).
Frozen Beverage Granita Machines Operator's Manual
Might be Caused By
The auger may be seized because product
may have over-frozen.
Airflow is blocked.
Condenser filter may be dirty.
The machine may not be properly assem-
bled.
Gaskets may need to be lubricated.
Gaskets may be worn or damaged.
Ambient temperature is too warm or
humidity is too high.
Annually
Inspect the louvers for dust and debris. Use a soft cloth to remove
debris and dust.
Course of Action
Position the Cold Drink/Granita switch to I (Cold Drink Mode).
Allow product to thaw. Mix ingredients may need to be adjusted
to prevent over-freezing. See "Add Mix" on page 3.
Machine does not have enough clearance or the environment is
not correct. See "Clearance and Environment Requirements" on
page 1.
Check that the filter located behind the rear panel is clean.
Verify the machine is assembled correctly. See "Assemble the
Machine" on page 6.
Lubricate the gaskets.
Replace the gaskets.
Cool the environment or relocate the machine.
Order the double-wall bowl option. Contact your local Vollrath
representative or consult Vollrath.com.
7