Assemble The Machine - Vollrath VCBA118 Manual Para Operadores

ASSEMBLE THE MACHINE

NOTICE: Total Blend sanitary lubricant, or equivalent must be used
when lubrication of parts is specified. Total Blend can be
used to lubricate parts and also as a spline lubricant. Do
not use more than one packet of Total Blend per machine.
NOTICE: The United States Department of Agriculture and the Food
and Drug Administration require that lubricants used on
food processing equipment be certified for this use. Use
lubricants only in accordance with the manufacturer's
instructions.
Clean, sanitize and allow all parts to air dry before assembling.
1. Slide the drip tray into place.
2. Lubricate the spigot piston, the magnetic rotor assembly, and the
point of the auger. Use Total Blend or other food grade sanitary
lubricant.
6 Liter Bowls
10 Liter Bowls
3. Reassemble the spigot on the bowl in reverse order. See page 5.
4. Replace the bowl gasket. The rim with the greater diameter must be
rested on the rear wall.
6
5. Reassemble the magnetic rotor assembly and then the auger.
6. Replace the bowl by pushing it towards the back wall, making sure it
fits properly onto the gasket. The locking lever will be lowered until it
rests on the drip tray surface.
7. For cold drink dispensing or cleaning, install the Cold Drink
Restrictor. To install, remove the condensation ring, clip the cold
drink restrictor on the end of the spigot. To remove or disassemble,
place your thumb on the cold drink restrictor tab and lightly pull
down to remove.
Frozen Beverage Granita Machines Operator's Manual