Tabla De Contenido - Petsafe PPA19-16904 Instrucciones De Seguridad Importantes

• Keep these instructions, and ensure that they are transferred to any new owner of the property.
• If the mounting surface (door, wall, etc.) is not level, the pet door must still be installed level to swing properly.
• When applying the cutting template, there should be a minimum of 3 inches (8 centimetres) between the bottom
and sides of the door and the outer edge of the template to maintain the structural integrity of the door.
• Use a manual screwdriver to tighten screws. Do not overtighten. Overtightening can strip the screws or warp the
pet door frame.
SAVE THESE INSTRUCTIONS
Table of contents
Kit includes
Tools needed
Mark the pet door location
Prepare the door
Cut the pet door opening
Drill holes for the frame
Install the pet door
Train your pet
Use the closing panel
Adjust or replace the flaps
Terms of use and limitation of liability
Warranty
petsafe.com
4
4
5
5
6
6
7
7
8
8
9
10
3