Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ASSEMBLYING YOUR KAMADO GRILL WITH OPTIONAL CART
IMPORTANT:
Read all instructions and warnings carefully before installation and use. Failure to
follow up these instructions may result in damages to the grill, injury to person, fire
hazard, and will void the warranty.
FRAGILE! Keep the grill box upright and handle with care. Do not move
the grill box around by dolly truck, and do not slide the box. Examine if
the box is punctured or crushed when received.
Serial Number Record: It is important to record the serial number which is located on the lower
Assembly Tools Needed: Philips Screw Driver (Large), 5mm or 3/16 Allen Wrench (Included),
STEP 1
Remove the plastic strips and remove the top and side panels of the shipping box.
Please remove protective plastic film from the grill. Remove all components included in the box
and the grill.
STEP 2
Assemble the optionanl cart. (The cart installation instruction sheet is included inside
the box of the cart.) If no cart purchased, move to STEP 4.
STEP 3
Place assembled cart on a secure level surface with locking wheels facing forward
before inserting the grill. Gently lift the grill and place it in the cart. Adjust the position so the
front of the grill is centered between the legs with the two locking casters. The bottom vent
should be easily accesable for use. (See Figure 1)
NOTE: IT IS HIGHLY RECOMMENDED THAT TWO PEOPLE LIFT THE GRILL INTO THE CART DUE TO
THE WEIGHT OF THE WHOLE GRILL. DO NOT LIFT THE GRILL BY THE HINGE OR SIDE SHELF
SUPPORT
Figure 1
STEP 4
Open the grill and fully open the bottom vent door. Place the firebox inside the grill
portion of the hinge. Please write down on warranty card, and return the
warranty card as instructed.
10mm wrench (Included)
TABS.
Figure 2
4
Tabla de contenido
