Section 2
Install Door Rails
Step 1
479.82 assembly (right)
Step 1
Locate the Right Door Rail. Attach the
Right Door Rail assembly to the Jeep belt
rail behind the right side door, inserting
the alignment pin on the bottom of the
Door Rail assembly into the hole in the
top of the belt rail.
Repeat for left side.
P7 - 54822 - Rev. C 0213
Hardware
Right Side
Installation Instructions - Supertop NX Twill
Door Rail
Qty. 1 per side
Part # 479.82 - Right (shown)
479.81 Left
M8 x 75mm Knob
Qty. 2 per side
Part # 478.90
Step 2
478.90 Knobs
Right Side
Step 2
Secure Left and Right Rear Door Rails to
the Jeep Sport Bar using (2) M8x75mm
Knobs per side. The knobs go through the
tabs on each Door Rail, and screw into the
threaded holes.
© 2013 Bestop, Inc.
Page 7
