Section 9
Assemble Rear Bow and Attach to Bow Mount Bracket
Step 1
Rear Bow Assembly
1 1
2
Step 1
Assemble the Rear Bow as shown in the
diagram above. Make sure that the spring
catches face outward.
Fasten each leg of the Rear Bow to the
hoop using (1) #8x 1/2" self-drill screw per
side.
P15 - 54822 - Rev. C 0213
Hardware
Rear Bow Assembly
Qty. 1 (3 pieces)
Part # 486.54
Right Side
Installation Instructions - Supertop NX Twill
Self-Drill Screw
Qty. 2
Part # 312.09
Step 2
Right Side
2
Step 1
Attach the Rear Bow to the Bow Mount
Bracket by pulling out on the spring catch
release knob, and sliding the catch over the
upper leg of the bow mount bracket.
Be sure to attach the spring catch to the
hole in the bracket as shown in the diagran
above.
Repeat for the left side.
© 2013 Bestop, Inc.
Page 15
1
