Section 7
Install #2 Bow Assembly
Step 1
459.30 #2 Bow Assembly
Step 1
Locate the #2 Bow Assembly with attached
stay straps. Place the #2 Bow Assembly on
top of the side bows, with the legs of the #2
Bow resting on the plastic spacers on top of
each side bow tubing. Align the holes in the
end of each #2 Bow leg with the holes in the
side bows.
P13 - 54822 - Rev. C 0213
Hardware
Right Side
Installation Instructions - Supertop NX Twill
#2 Bow Assembly
With attached stay-straps
Qty. 1
Part # 459.30
Plastic Bushing
Qty. 2 per side
Part # 473.40
M5 Nylock Nut
M5 x 30 Screw
Qty. 1 per side
Qty. 1 per side
Part # 308.62
Part # 308.87
Step 2
Right Side
Step 2
Secure the #2 Bow Assembly to the side
bow using (1) M5x30 screw, (2) plastic
bushings, and (1) M5 Nylock nut per side,
in the order shown in the diagram above.
Repeat on the left side.
© 2013 Bestop, Inc.
Page 13
