Section 14
Attach Foam Seal and Foam Tape on inside of Header
Step 1
Foam Seals and Foam Tape Strips
Right Side
Step 1
With the front portion of the top folded back,
locate the (2) Foam Seals and the (2) Foam
Tape strips. Remove protective liner from
the back side of the Foam Seal and place
the Foam Seal in the location shown in the
diagram.
Remove protective liner from the back side
of the Foam Tape Strip and place the Foam
Tape Strip in the location shown in the
diagram.
Repeat for the left side.
P20 - 54822 - Rev. C 0213
Hardware
Foam Tape Strips
Qty. 2
Part # 417.43
Installation Instructions - Supertop NX Twill
Foam Seals
Qty. 1 per side
Parts # 457.77(L)
& #457.76(R)
Page 20
Right Side
© 2013 Bestop, Inc.
