Volume Adjustment; Bluetooth Operation - Trevi XR 85 BT Guia Del Usuario

- USB Mode, if present a USB-type memory in the slot (3), the device will start
playing songs automatically.
- LINE IN mode, if entered the stereo cable Jack / Jack 3.5mm AUX in jack (4).
- Radio Mode.

VOLUME ADJUSTMENT

Press and hold the Volume - (6), Volume + (9) to adjust the volume.
OPERATION IN LINE
- Turn on the speaker.
- Connect the cable to the jack AUX IN jack (4) and the other end to the external
device.
- Start from the external device playback.
OPERATION MICRO SD CARD / USB MEMORY
- Turn on the speaker.
- Insert a Micro SD card into the slot (5) holding the contacts facing the rear of the
device or insert a USB memory.
- Playback will start automatically.
- Press once on the (6) button to skip to the previous track, press the button once
(9) to move to the next track.
- Press the button (8) to pause, to resume playback press again.

BLUETOOTH OPERATION

COUPLING DEVICES
1. Place the speaker next to the Bluetooth device to be coupled.
2. Turn on the speaker, press the key MODE(7) until the voice message "The bluetooth device is
ready to pair".
3. Follow the instructions of your device to search the speaker.
4. Search for the speaker named "XR 85 BT" or "Y135" and enter the PIN "0000"
if required.
5. When paired (voice message "The bluetooth device is connected") will be possible to play
music.
Notes:
- The Bluetooth speaker will go into standby mode automatically after a certain period of time,
to reactivate it simply power cycle the operative part to return to normal operation.
- The Bluetooth speaker only works with a connection at a time, the connection
can not be interrupted during normal operation.
- When the Bluetooth pairing with external devices fails, delete another Bluetooth
device in the list of connections, restart the Bluetooth speaker and search for the
signal again.
COMMANDS IN BLUETOOTH MODE
- Press once on the (6) button to skip to the previous track, press the button once (9) to move
to the next track.